PART #:	AG126
Description:	AngleGuard, 2 Bend, 58"H for one Instrument and/or Radar / Chartplotter NavPod up to 13.5"
W x H x D:	9.5" x 58" x 1.25"

NavPod Protects Your Electronics In Harsh Conditions

Angle Guards 9.5" Wide

NavPod AngleGuards are designed to upgrade sailboat steering systems to accommodate mounting of electronics onto NavPods.

Edson is a popular manufacturer of steering systems who has always used a 9.5" wide pedestal guard. Most of their pedestal guards are 1" in diameter. Lewmar (formally Whitlock) also has manufactured steering systems that use the 9.5" wide format. NavPod supplies the SG10 and AG10 as a easy retrofit onto either of these systems.

Because of the clean and secure method of concealing wires and the need to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter AngleGuards. Often the existing Top Plate needs to be bored out or replaced with the TP125 to accommodate the larger diameter. NavPod supplies Polished Stainless Steel feet with all 1.25" AngleGuards.

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.

Product : NAVPOD AG126 ANGLE GUARD 9.5" WIDE DOUBLE BEND 1.25" DIA.
Manufacturer : NAVPOD
Manufacturer Part No : AG126
UPC : 659988101324

PART #:	AG127
Description:	AngleGuard, 2 Bend, 58"H for one Instrument and/or Radar / Chartplotter NavPod up to 10.5"
W x H x D:	9.5" x 58" x 1.25"

NavPod Protects Your Electronics In Harsh Conditions

Angle Guards 9.5" Wide

NavPod AngleGuards are designed to upgrade sailboat steering systems to accommodate mounting of electronics onto NavPods.

Edson is a popular manufacturer of steering systems who has always used a 9.5" wide pedestal guard. Most of their pedestal guards are 1" in diameter. Lewmar (formally Whitlock) also has manufactured steering systems that use the 9.5" wide format. NavPod supplies the SG10 and AG10 as a easy retrofit onto either of these systems.

Because of the clean and secure method of concealing wires and the need to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter AngleGuards. Often the existing Top Plate needs to be bored out or replaced with the TP125 to accommodate the larger diameter. NavPod supplies Polished Stainless Steel feet with all 1.25" AngleGuards.

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.
Product : NAVPOD AG127 ANGLE GUARD 9.5" REPLACES AG125
Manufacturer : NAVPOD
Manufacturer Part No : AG127
UPC : 659988106121

AG18 9.5" Wide AngleGuard - Single Bend - 1" Diameter
Part #: AG18

NavPod Protects Your Electronics In Harsh Conditions

InstrumentPods and SailPods can be mounted together on a single bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.

Features:

• 1" Diameter Single Bend
  
• 9.5" Center to Center
  
• 12" Angled Flat Length

Product : NAVPOD AG18 ANGLEGUARD 1" SINGLE BEND S.S. 58"H X 9.5"W
Manufacturer : NAVPOD
Manufacturer Part No : AG18
UPC : 659988106558

PART #:	AG226
Description:	AngleGuard, 2 Bend, 58"H for one Instrument and/or Radar Chartplotter NavPod up to 13.5"
W x H x D:	12" x 64" x 1.25"

NavPod Protects Your Electronics In Harsh Conditions

Angle Guards 12" Wide

Lewmar (formally Whitlock) has primarily used a 12" wide pedestal guard on the steering systems they manufacturer. It is always 1.25" in diameter and can easily accomodate retrofitting of any the 12" wide AngleGuards without the need of top plate replacement.

NavPod does not accommodate upgrading other popular european manufacturers like Goiat or Solomar. In the US, Merriman/Yacht Specialities produced many systems still in use today on older boats. This system is recognized by a 1" in diameter pedestal guard and 12.5" width measured on center of the tubes. All of these systems would need to be converted into accommodating the 9.5" or 12" wide AngleGuards in order to mount the necessary NavPods to hold your new electronics.

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.
Product : NAVPOD AG226 ANGLE GUARD 12" WIDE DOUBLE BEND 1.25" DIA.
Manufacturer : NAVPOD
Manufacturer Part No : AG226
UPC : 659988101331

AG27 9.5" Wide AngleGuard - Double Bend - 1" Diameter
Part #: AG27

NavPod Protects Your Electronics In Harsh Conditions

InstrumentPods and SailPods can be mounted together on a double bend stainless steel AngleGuard. There are many sizes of mounting options available to help to produce the ultimate NavStation at the helm.

Features:

• 9.5" Center to Center
  
• 1" Diameter Double Bend
  
• 10" Angled Flat Length
  
• 8" Upper Vertical Flat Length

Product : NAVPOD AG27 ANGLEGUARD 1" DOUBLE BEND S.S. 58"H X 9.5"W
Manufacturer : NAVPOD
Manufacturer Part No : AG27
UPC : 659988106633

PART #:	GP1040
Description:	Uncut (usable face = 17.5"w x 7.5"h)
W x H x D:	20.25" x 9.5" x 6.125"

NavPod Protects Your Electronics In Harsh Conditions

Un-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". It's a small handheld router style cutter that shreds the material while cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible Un-cut NavPod, the depth measurement stated in the chart is overall outside measurement. Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. This can reduce the overall and needs to be considered when making a determination of actual available depth clearance.

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.
Product : NAVPOD GP1040 SAILPOD UNCUT USABLE FACE 17.5W X 7.5 H
Manufacturer : NAVPOD
Manufacturer Part No : GP1040
UPC : 659988102574

GP1040-07 SystemPod Pre-Cut for Simrad NSS7 or B&G Zeus Touch 7 & Space On The Left for 9.5" Wide Guard

NavPod GP1040 Series for 9.5" Guard SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards .

SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.

Sizing:
Overall Size: 9.5"H x 20.75"W x 6"D
Usable Face: 7.375"H x 17.5"W x 5"D
Max Cutout: 7"H x 17"W

All SystemPods include:

• Acrylic capped ABS plastic
  
• Chromed stainless steel tamper-proof fasteners
  
• Double seal for watertight integrity
  
• Models are available pre-cut for popular electronics
  
• Stainless steel mounting hardware and mounting gaskets

Product : NAVPOD SYSTEM POD PRE-CUT FOR SIMRAD NSS7 / B&G ZEUS TOUCH
Manufacturer : NAVPOD
Manufacturer Part No : GP1040-07
UPC : 659988109665

GP1040-13 SystemPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² 9 & 1 Instrument for 9.5" Wide Guard

NavPod GP1040 Series for 9.5" Guard SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.

SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.

Sizing:
Overall Size: 9.5"H x 20.75"W x 6"D
Usable Face: 7.375"H x 17.5"W x 5"D
Max Cutout: 7"H x 17"W
Instrument Cutout: 3.6"

All SystemPods include:

• Acrylic capped ABS plastic
  
• Chromed stainless steel tamper-proof fasteners
  
• Double seal for watertight integrity
  
• Models are available pre-cut for popular electronics
  
• Stainless steel mounting hardware and mounting gaskets

Product : NAVPOD SYSTEMPOD PRE-CUT FOR SIMRAD NSS9 EVO2 /B&G ZEUS2 9
Manufacturer : NAVPOD
Manufacturer Part No : GP1040-13
UPC : 659988108613

GP1040-19 SystemPod for 9.5" Wide Guard Pre-Cut for Raymarine ES97/ES98 & 1 Instrument

Instrument Cut Out Size: 3.6" Hole

NavPod GP1040 Series for 9.5" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards .

The Hi-Gloss Material

• NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal

• All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws

• We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process

• Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our Commitment to Quality

• We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Product : NAVPOD GP1040-19 SYSTEMPOD PRE-CUT FOR RAYMARINE ES97
Manufacturer : NAVPOD
Manufacturer Part No : GP1040-19
UPC : 659988110487

SailPod Un-Cut Flush FrontUseable Face = 17.125" w x 9.125" h

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (19.75"w x 11.5"h x 6.75"d)


Product : NAVPOD GP1080 SAILPOD UNCUT FOR 9.5" GUARD
Manufacturer : NAVPOD
Manufacturer Part No : GP1080
UPC : 659988105971

PART #:	GP1170
Description:	Uncut (usable face = 20"w x 9.875"h)
W x H x D:	N/A

NavPod Protects Your Electronics In Harsh Conditions

Un-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". It's a small handheld router style cutter that shreds the material while cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible Un-cut NavPod, the depth measurement stated in the chart is overall outside measurement. Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. This can reduce the overall and needs to be considered when making a determination of actual available depth clearance.

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.
Product : NAVPOD GP1170 SAILPOD UNCUT USABLE FACE 20W X 9.875H
Manufacturer : NAVPOD
Manufacturer Part No : GP1170
UPC : 659988102741

GP1200 SailPod Uncut for 9.5" Wide Guard

GP1200 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.

SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.

Sizing:
Overall Size: 11.3"H x 16.5"W x 5.55"D
Usable Face: 9.85"H x 15.18"W x 4.25"D
Max Cutout:9"H x 14.25"W

All SailPods include:

• Acrylic capped ABS plastic
  
• Chromed stainless steel tamper-proof fasteners and wrench
  
• Double seal for watertight integrity
  
• Models are available pre-cut for popular electronics
  
• Stainless steel mounting hardware and mounting gaskets

Product : NAVPOD SAILPOD UN-CUT (USABLE FACE = 15.18"W X 9.85"H)
Manufacturer : NAVPOD
Manufacturer Part No : GP1200
UPC : 659988108675

GP1201 SailPod Pre-Cut for Garmin 1020/1020xs/1040xs for 9.5" Wide Guard

GP1200 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.

SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.

Sizing:
Overall Size: 11.3"H x 16.5"W x 5.55"D
Usable Face: 9.85"H x 15.18"W x 4.25"D
Max Cutout:9"H x 14.25"W

All SailPods include:

• Acrylic capped ABS plastic
  
• Chromed stainless steel tamper-proof fasteners and wrench
  
• Double seal for watertight integrity
  
• Models are available pre-cut for popular electronics
  
• Stainless steel mounting hardware and mounting gaskets

Product : NAVPOD SAILPOD PRE-CUT FOR GARMIN 1020/1020XS/1040XS
Manufacturer : NAVPOD
Manufacturer Part No : GP1201
UPC : 659988108347

GP1202 SailPod Pre-Cut for Simrad NSS12 evo2 or B&G Zeus² 12 for 9.5" Wide Guard

GP1200 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.

SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.

Sizing:
Overall Size: 11.3"H x 16.5"W x 5.55"D
Usable Face: 9.85"H x 15.18"W x 4.25"D
Max Cutout:9"H x 14.25"W

All SailPods include:

• Acrylic capped ABS plastic
  
• Chromed stainless steel tamper-proof fasteners and wrench
  
• Double seal for watertight integrity
  
• Models are available pre-cut for popular electronics
  
• Stainless steel mounting hardware and mounting gaskets

Product : NAVPOD SAILPOD PRE-CUT FOR SIMRAD NSS12 EVO2 / B&G ZEUS2
Manufacturer : NAVPOD
Manufacturer Part No : GP1202
UPC : 659988108521