MotorGuide 105 Single Bank 5A Battery Charger
$80.99
5 AMP Battery ChargerPart #: 31705
The MotorGuide on-board battery charger incorporates a fully automatic technology that eliminates the need to use portable battery chargers to charge each battery one at a time. Pre-wired for easy installation and years of automatic charging and maintenance for all batteries on-board.
Just plug it in and forget about it.
Features:
- Automatic charging for Lead Acid or GEL Batteries
- Charges and conditions batteries with a built-in safe maintenance mode for long and short term storage
- Auto Transfer Technology will maintain the engine crank battery while transferring 100% of the available charging amps to your trolling batteries
- Waterproof, shock restant and saltwater tested
- Reverse polarity, ignition and temperature protection
- Power, charging and maintaining LED indicators
- Pre-wired for easy installation
Product : MOTORGUIDE 105 SINGLE BANK 5A BATTERY CHARGER
Manufacturer : MOTORGUIDE
Manufacturer Part No : 31705
UPC : 022697031754
MotorGuide 210 Dual Bank 10A Battery Charger - 5-5 Amps
$125.99
10 AMP Battery ChargerPart #: 31710
The MotorGuide on-board battery charger incorporates a fully automatic technology that eliminates the need to use portable battery chargers to charge each battery one at a time. Pre-wired for easy installation and years of automatic charging and maintenance for all batteries on-board.
Just plug it in and forget about it.
Features:
- Automatic charging for Lead Acid or GEL Batteries
- Charges and conditions batteries with a built-in safe maintenance mode for long and short term storage
- Auto Transfer Technology will maintain the engine crank battery while transferring 100% of the available charging amps to your trolling batteries
- Waterproof, shock restant and saltwater tested
- Reverse polarity, ignition and temperature protection
- Power, charging and maintaining LED indicators
- Pre-wired for easy installation
Product : MOTORGUIDE 210 DUAL BANK 10A BATTERY CHARGER 5/5 AMPS
Manufacturer : MOTORGUIDE
Manufacturer Part No : 31710
UPC : 022697317100
MotorGuide 313 Triple Bank 13A Battery Charger - 5-5-3 Amps
$161.99
13 AMP Battery ChargerPart #: 31713
The MotorGuide on-board battery charger incorporates a fully automatic technology that eliminates the need to use portable battery chargers to charge each battery one at a time. Pre-wired for easy installation and years of automatic charging and maintenance for all batteries on-board.
Just plug it in and forget about it.
Features:
- Automatic charging for Lead Acid or GEL Batteries
- Charges and conditions batteries with a built-in safe maintenance mode for long and short term storage
- Auto Transfer Technology will maintain the engine crank battery while transferring 100% of the available charging amps to your trolling batteries
- Waterproof, shock restant and saltwater tested
- Reverse polarity, ignition and temperature protection
- Power, charging and maintaining LED indicators
- Pre-wired for easy installation
Product : MOTORGUIDE 313 TRIPLE BANK 13A BATTERY CHARGER 5/5/3 AMPS
Manufacturer : MOTORGUIDE
Manufacturer Part No : 31713
UPC : 022697317131
MotorGuide 50 Amp Manual Reset Breaker
$14.39
Protect your motor and boat wiring with this 50-amp Manual Reset Breaker.
Product : MOTORGUIDE 50 AMP MANUAL RESET BREAKER
Manufacturer : MOTORGUIDE
Manufacturer Part No : MM5870
UPC : 745061554757
Motorguide 6-Gauge Wire Receptacle Adapter
$13.49
6 Gauge Wire Receptacle AdapterMotorGuide's 6 Gauge Wire Receptacle Adapter converts original receptacle to
6 gauge wiring.
- Allows 6 gauge wire connection to MotorGuide medium-duty trolling
motor receptacle
- Corrosion resistant
- Plated brass electrical components
Product : MOTORGUIDE 6GA RECEPTACLE ADAPTER
Manufacturer : MOTORGUIDE
Manufacturer Part No : 8M0092067
UPC : 745061937215
Motorguide 60 Amp Breaker Kit
$35.99
60-Amp Circuit BreakerMotorGuide's Waterproof 60-Amp Circuit Breaker. Protects your motor and boat wiring. Manual reset breaker is compatible with all 12, 24 and 36 volt trolling motors.
- Manual reset
- Compatible with all 12-, 24- and 36-volt trolling motors
- Completely waterproof
Product : MOTORGUIDE BREAKER KIT 60 AMP
Manufacturer : MOTORGUIDE
Manufacturer Part No : 8M0064076
UPC : 022697640765
MotorGuide 8 Gauge Battery Cable & Terminals 4' Long
$20.69
Protect your investment with this 50-amp breaker and heavy duty 8-ga. battery cable and terminal that is used most often to add a second or third battery in a 24 or 36-volt installation. The 50-amp breaker works with the new high-thrust, high-performance motors.
Product : MOTORGUIDE 8 GAUGE BATTERY CABLE AND TERMINALS 4' LONG
Manufacturer : MOTORGUIDE
Manufacturer Part No : MM309922T
UPC : 745061630529
MotorGuide Black Removable Mounting Plate
$103.49
Made out of a high-impact composite, these mounting plates make removing your trolling motor and mount quick, fast, and simple. The universal hole-patterns fit most traditional trolling motor mounts and all traditional MotorGuide trolling motor mounts. Fits Gator Flex 360, Gator 20.5, 20.8, 21, 21R mounts and can be modified by adding additional holes to fit our longer 23.5 and 24 mounts. The smaller insert piece is secured to the boat with stainless steel bolts, washers, and nylon lock nuts providing a solid base. The larger outside piece slides into place from the front of the boat and is held in place by a tab on the inner piece with a stainless steel pin running through both pieces at the back of the mount.
These mounting plates are ideal for saltwater flats, ski, and fish boats, or anytime the trolling motor needs to be quickly removed.
Product : MOTORGUIDE BLACK REMOVABLE MOUNTING PLATE
Manufacturer : MOTORGUIDE
Manufacturer Part No : MGA501A2
UPC : 089287102768
MotorGuide Bounce Buster Kit
$44.99
Bounce Buster Kit
The MotorGuide Bounce Buster is designed to prevent trolling motor mount, motor, and boat damage when navigating rough water. Featuring a high-impact plastic tube with a rubber foot, there is a model available to fit any Gator Mount. It attaches using the mount's existing hardware. The tube is cut to the required length for proper spacing between the mount and front deck of the boat. The Bounce Buster pivots off the head of the mount in the stow position to prevent downward momentum caused by rough water impact, keeping the mount and motor rock solid on the boat. In the fishing position, the Bounce Buster cleanly folds out of the way.
Perfect for bass boat applications where the front deck of the boat is less than 12 inches of the head of the mount. See the Bounce Buster II rigged on the 2007 Triton Bassmaster Classic Bass Boats.
Product : MOTORGUIDE BOUNCE BUSTER KIT
Manufacturer : MOTORGUIDE
Manufacturer Part No : MGA097B6
UPC : 089287028938
MotorGuide Fixed Extension 14" Handle f- Transom Tiller
$17.09
Made for trolling motors and kicker engines. Locks into place to fit most transom-mount trolling motors and popular tiller engines. MotorGuide extension handles are built out of aluminum tubing with soft-grip handles and adjustable connectors for a solid connection. Preferred by top walleye pros, the 36" version fits the Mercury 9.9 HP Pro Kicker for system trolling applications.
Product : MOTORGUIDE FIXED EXTENSION 14" HANDLE F/ TRANSOM TILLER
Manufacturer : MOTORGUIDE
Manufacturer Part No : MGA504A1
UPC : 089287102799
Motorguide FW X3 Mount - Greater Thank 45" Shaft
$188.99
Mount For Greater Than 45" ShaftThe X3 mounting bracket is built tough with aircraft-grade extruded
aluminium to minimize flex and provide precision control under high-thrust.
- Improved rigidity and durability
- Easier to stow and deploy
- Wider base for added stability
- Stainless steel bushings in key wear points
- Easy motor height adjustment and motor removal
Product : MOTORGUIDE FW X3 FRESH WATER MOUNT GREATER THAN 45" SHAFT
Manufacturer : MOTORGUIDE
Manufacturer Part No : 8M0092074
UPC : 10022697920741
Motorguide FW X3 Mount - Less Than 45" Shaft
$179.99
Mount For Less Than 45" ShaftThe X3 mounting bracket is built tough with aircraft-grade extruded
aluminium to minimize flex and provide precision control under high-thrust
- Improved rigidity and durability
- Easier to stow and deploy
- Wider base for added stability
- Stainless steel bushings in key wear points
- Easy motor height adjustment and motor removal
Product : MOTORGUIDE FW X3 FRESH WATER MOUNT LESS THAN 45" SHAFT
Manufacturer : MOTORGUIDE
Manufacturer Part No : 8M0092073
UPC : 10745061937274
MotorGuide Great White Removable Mounting Plate
$103.49
Made out of a high-impact composite, these mounting plates make removing your trolling motor and mount quick, fast, and simple. The universal hole-patterns fit most traditional trolling motor mounts and all traditional MotorGuide trolling motor mounts. Fits Gator Flex 360, Gator 20.5, 20.8, 21, 21R mounts and can be modified by adding additional holes to fit our longer 23.5 and 24 mounts. The smaller insert piece is secured to the boat with stainless steel bolts, washers, and nylon lock nuts providing a solid base. The larger outside piece slides into place from the front of the boat and is held in place by a tab on the inner piece with a stainless steel pin running through both pieces at the back of the mount.
These mounting plates are ideal for saltwater flats, ski, and fish boats, or anytime the trolling motor needs to be quickly removed.
Product : MOTORGUIDE GREAT WHITE REMOVABLE MOUNTING PLATE
Manufacturer : MOTORGUIDE
Manufacturer Part No : MGA515A2
UPC : 089287102904
MotorGuide Machete III Black 3 Blade Prop Kit 3.5"
$30.59
Application: Speed & Efficiency
MotorGuide's standard propeller common on many of the production motors. The tapered hub design, by Mercury Propellers, makes this prop extremely fast with excellent overall efficiency. Its weedless performance is very good and it performs on a wide range of motors, including 12, 24 and 36-volt models. (Includes prop, prop pin and prop nut)
Product : MOTORGUIDE MACHETE III BLACK 3 BLADE PROP KIT 3.5"
Manufacturer : MOTORGUIDE
Manufacturer Part No : MGA089B
UPC : 089287102690
MotorGuide Machete III Great White Glass Filled 3 Blade
$40.49
Application: Speed & Efficiency
Go Faster, Go Shallower, Go Quieter with MotorGuide's 3-blade, glass-filled, tapered hub design that's more rugged. Get the durability that the pros demand. All of the advantages of the Machete III propeller in a more durable material for long lasting performance. (Includes prop, prop pin, and prop nut). Motorguide makes it simple to upgrade your trolling motor prop to the glass-filled Machete III, or any other upgraded propeller, because our lower units are standardized at 3.5".
Product : MOTORGUIDE MACHETE III GREAT WHITE GLASS FILLED 3 BLADE
Manufacturer : MOTORGUIDE
Manufacturer Part No : MGA089W
UPC : 089287102706
MotorGuide Metal Machete III Blade Aluminum Weedless Prop 3.5"
$53.09
Application: Shallow & Durability
Recommended only for 36-volt Digital lower units, the Metal Machete is made out of cast aluminum and provides incredible thrust and long lasting durability. Used by top professionals, this is MotorGuide's most durable prop. (Includes propeller, prop pin and prop nut.)
Product : MOTORGUIDE METAL MACHETE 3 BLADE ALUMINUM WEEDLESS PROP
Manufacturer : MOTORGUIDE
Manufacturer Part No : MGA087M
UPC : 089287102720