Input:AC100-250V 50HZ Current:1A Output:DC5V Current:500maH×2 Apply to any type of columniform 3.7V lithium-ion battery Cut-off charge voltage: 4.2V Max charge current: 3.5A

Detachable stainless steel strike ring for RS11

Fits for Klarus P series and ST lights

Features: Max output: an impressive 1200 Lumens on high Max run time: 205 hours (8.5 days) on low Two flashlight heads produce a wide, intense beam with good throw ability. Flat side head for wear comfortable Dual button tail switch for quick, one-hand operation. Mode switch provides good tactile feedback and is very easy to locate in the dark Strobe can be activated with the Mode switch when flashlight is on or off Forward tactical main switch with momentary activation Maintains constant brightness with super high efficiency Waterproof to IPX-8 Standard Reverse polarity protection Specifications: Two CREE XM-L U2 LEDs, each with a lifespan of up to 50,000 hours. Modes: 3 lighting modes and 1 flashing Lighting output: 1200 lumens/ 2hrs - 370 lumens/ 5.3 hrs -10 lumens/ 205hrs Working Voltage: 7.0V-14.0V Battery: 4 x CR123A / 2 x 18650 Body color: Military grey Reflector: Textured orange peel reflector Lens: Toughened ultra-clear, durable glass Material: Aerospace grade aluminum Overall Dimensions: 218.8mm (Entire Length) Head Dimensions: 68.8mm (length) x 67.3mm (width) x 33.5mm (height) Body dimensions: 170mm (length) x 28mm (diameter)

The Klarus XT11 and XT20 are excellent tactical lights, but don't do well when you really need to see something out at 300 meters away. The XT30 fills that gap nicely, with the same refined dual switch interface as the XT11 and XT20, but with a much larger reflector than either previous model. The combination of the large reflector and CREE XM-L LED driven hard gives you 360 meters of throw on high output. The XT30 is powered by 4 CR123 batteries or 2 18650 rechargeable lithium ion batteries. Features: Specially designed deep parabolic reflector produces a perfect beam profile and super long throw ability. Uses a Cree XM-L U2 LED, which delivers a maximum output of 820 ANSI lumens Max run time: 180hours on low Beam throw ability: 360meters on high New circuit design delivers both high lumen output and long runtime Dual button tail switch for quick, one-hand operation. No need to fiddle with switches in two different places Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode Detachable stainless steel strike bezel Optional color filters can be securely attached to the head of the light when the bezel is removed Reverse polarity protection protects flashlight and battery from damage Can be used with ED10 remote switch and fits a 1 inch gun mount Specifications: CREE XM-L (U2) LED with a lifespan of up to 50,000 hours Three lighting modes and 1 flashing mode: Lighting modes: 820 ANSI lumens (1.8hrs) 310 lumens (5.5 hrs) 10 lumens (180 hrs) Variable frequency strobe: 820 lumens (3.6 hrs) Working Voltage: 7V - 14V Battery: 4xCR123A/2x18650 (not included) Use of 16340 batteriesis not recommended) Body color: Dark grey Reflector: Deep parabolic reflector Tactical main switch for turning the light on and off. Momentary activation from off Dedicated mode switch for instant access to strobe and changing modes Lens: Toughened ultra-clear glass Material: Aircraft grade aluminum 6061-T6 Dimensions: 248mm (Length) x 58mm (Head) x 25.4mm (Body) Net weight: 273g (Excluding battery) Waterproof to IPX-8 Standard (underwater to 2 meters) Included accessories: Holster, lanyard, spare rubber boot, metal tactical ring and two spare o-rings

P1A and P1C can use ST10 holster.

Patented Tail-cap & Side Switch design Easy-access Strobe feature can activated at any time Waterproof design rated to IPX-8 (waterproof to a depth of 2 meters) Intelligent control circuits balance brightness, run-time and heat emission for improved performance

Klarus filters are made to a very high standard using hardened ultra-clear glass (white diffuser) with an anti reflective coating which is specifically designed to work with the high power output of the Klarus XT11 flashlight. The filter body is manufactured from aircraft grade high quality aluminum and is hard anodized for extreme durability making it useable in almost any environment. To use a filter on the XT11, you simply unscrew and remove the steel strike bezel and replace it with the filter. This is the most secure way to use the filter on a XT11. White Diffuser Filter: Makes the flashlightbeam more gentle, hotspot is diffused so the light gives a flood beam. It is suitable for close distance lighting and the uniform beam distribution is very suitable for area lighting.

Klarus filters are made to a very high standard using hardened ultra-clear glass (blue diffuser) with an anti reflective coating which is specifically designed to work with the high power output of the Klarus XT11 flashlight. The filter body is manufactured from aircraft grade high quality aluminum and is hard anodized for extreme durability making it useable in almost any environment. To use a filter on the XT11, you simply unscrew and remove the steel strike bezel and replace it with the filter. This is the most secure way to use the filter on a XT11. Blue Filter Used for night fishing, tracking wounded game, and close reading.

Features: Max output: 245 Lumens Max run time: 18 hours Two output modes and easy operation Forward tactical switch with momentary activation Clip for hands-free operation Waterproof to IPX-8 Standard Smooth beam - perfect balance of beam throw and spill Military Grade HA Type III anodizing Digitally regulated output - maintains constant brightness Reverse polarity protection Specifications: Emitter: Cree XP-G R5 LED with a lifespan of 50,000 hours Max output: 245 AISI Lumens/ 1hr -Low output: 20 Lumens/ 18 hrs. Working Voltage: 1.8V - 3.2V Battery: 1pc CR123A Switch: Tactical tail switches power on/ off and momentary activation. Modes: Rotating heads adjust brightness output - tighten head for max, loosen for low Lens: Toughened ultra-clear glass. Material: Aircraft grade aluminum with Military Grade HA Type III anodizing. Reflector: Textured reflector for smooth beam. Dimensions: 89mm (Length) x 23mm (Head) x 22.6mm (Body)

Rechargeable flashlights are typically low power with low run-times. Not the RS11. The ultra bright CREE XM-L U2 LED outputs a maximum of 620 ANSI lumens constantly for 2.2 hours and maximum runtime in low mode is 215 hours. Please note that an 18650 rechargeable battery is NOT included with the light. We recommend this one. The RS11 features Klarus’s patented dual-switch user interface (UI), which gives you full control over the flashlight using just your thumb. This unique UI uses two switches – one high/ prominent switch and one lower switch, both of which are located on the side of the flashlight and are easy to locate by touch in the dark. The position of these switches makes it easy to change modes and instantly access the disorientating strobe, which is an effective personal safety feature. You can take the RS11 everywhere you go because it can be recharged in many different ways – for example: via a mains socket, PC/ laptop USB port, car USB port, 12v plug (with a 12v adapter), USB solar charger…In fact, any device with a USB port. If you are in a remote location with none of the above charging options available, you can use a recharged 18650 battery or even 2x CR123A batteries – making it extremely versatile. The RS11 is packed with features; in addition to the above, the flashlight has a memory function to memorize the last mode used; it has a stainless steel strike bezel that can be removed and replaced with a color filter or diffuser; and the charging cable connector is magnetic, so it is quick and easy to insert the charger plug. Add to this the precision engineering, tough construction and thoughtful design, and you can see why the Klarus RS11 is an excellent choice for police, security, search & rescue, outdoor pursuits, traveling, home use and personal protection. Features: Specially designed magnetic connection. When the charging cable is within 1cm of the charging port it self-locates to make the connection. The charging cable can be removed quickly and safely at any time, which makes it an effective flashlight to use in rapid response situations. Ergonomically designed to be easy to operate with just one hand. The switches are very easy to locate by touch in the dark. Uses a USB interface chargeable design, so you can charge in the home, office, airport, vehicle, etc. Basically, anywhere that has a USB interface. You can also remove the battery and charge separately and also use CR123A batteries (do not charge CR123A batteries). Low loss, high intensity, portable USB charging cable (K1-D5) Any 18650 rechargeable battery with PCB protection can be used. Strobe can be activated when the flashlight is on or off, giving instant access to a blinding strobe from any mode. Three lighting modes with memory function make it adaptable for different situations. Detachable stainless steel strike bezel protects the lens and has a self-defense purpose. Color filters and a diffuser can be securely attached; screwed-in to replace the bezel Uses just one 18650 battery. Max output is 620 ANSI lumens and super long runtime of 9 days. Waterproof to IPX-8 Standard (underwater to 2 meters) Specification: CREE XM-L (U2) LED with a lifespan of up to 50,000 hours Lighting modes: 620 ANSI lumens (2.2 hrs) -- 150 lumens (7.3 hrs) -- 10 lumens (215 hrs) Variable frequency strobe: 620 lumens (4.4 hrs) Working Voltage: 3.4V - 8.

Rechargeable flashlights are typically low power with low run-times. Not the RS11. The ultra bright CREE XM-L U2 LED outputs a maximum of 620 ANSI lumens constantly for 2.2 hours and maximum runtime in low mode is 215 hours. Please note that an 18650 rechargeable battery is NOT included with the light. We recommend this one. The RS11 features Klarus’s patented dual-switch user interface (UI), which gives you full control over the flashlight using just your thumb. This unique UI uses two switches – one high/ prominent switch and one lower switch, both of which are located on the side of the flashlight and are easy to locate by touch in the dark. The position of these switches makes it easy to change modes and instantly access the disorientating strobe, which is an effective personal safety feature. You can take the RS11 everywhere you go because it can be recharged in many different ways – for example: via a mains socket, PC/ laptop USB port, car USB port, 12v plug (with a 12v adapter), USB solar charger…In fact, any device with a USB port. If you are in a remote location with none of the above charging options available, you can use a recharged 18650 battery or even 2x CR123A batteries – making it extremely versatile. The RS11 is packed with features; in addition to the above, the flashlight has a memory function to memorize the last mode used; it has a stainless steel strike bezel that can be removed and replaced with a color filter or diffuser; and the charging cable connector is magnetic, so it is quick and easy to insert the charger plug. Add to this the precision engineering, tough construction and thoughtful design, and you can see why the Klarus RS11 is an excellent choice for police, security, search & rescue, outdoor pursuits, traveling, home use and personal protection. Features: Specially designed magnetic connection. When the charging cable is within 1cm of the charging port it self-locates to make the connection. The charging cable can be removed quickly and safely at any time, which makes it an effective flashlight to use in rapid response situations. Ergonomically designed to be easy to operate with just one hand. The switches are very easy to locate by touch in the dark. Uses a USB interface chargeable design, so you can charge in the home, office, airport, vehicle, etc. Basically, anywhere that has a USB interface. You can also remove the battery and charge separately and also use CR123A batteries (do not charge CR123A batteries). Low loss, high intensity, portable USB charging cable (K1-D5) Any 18650 rechargeable battery with PCB protection can be used. Strobe can be activated when the flashlight is on or off, giving instant access to a blinding strobe from any mode. Three lighting modes with memory function make it adaptable for different situations. Detachable stainless steel strike bezel protects the lens and has a self-defense purpose. Color filters and a diffuser can be securely attached; screwed-in to replace the bezel Uses just one 18650 battery. Max output is 620 ANSI lumens and super long runtime of 9 days. Waterproof to IPX-8 Standard (underwater to 2 meters) Specification: CREE XM-L (U2) LED with a lifespan of up to 50,000 hours Lighting modes: 620 ANSI lumens (2.2 hrs) -- 150 lumens (7.3 hrs) -- 10 lumens (215 hrs) Variable frequency strobe: 620 lumens (4.4 hrs) Working Voltage: 3.4V - 8.

The TR11 remote pressure switch has been created for the Klarus XT series flashlights to make them more multi-purpose. The TR11 will fit the XT1C, XT1A and XT2A models to create a compact gun light for military use, hunting and air soft. Unlike many other remote pressure switches, the TR11 has two buttons on the pressure pad, which will give you full control over the light. Attach your XT series flashlight using the TR11 remote switch to your bike to light-up a dark trail or road at night. Features: Strobe function can be accessed by just clicking once in any mode, including off mode. Provides multiple outputs and tactical momentary-on function. The constant-on switch also provides access to High-Mid-Low modes and strobe. Offers a signal controlled switch; which provides no power loss to the flashlight unit. In other remote switches, power efficiency can be affected which shortens the unit’s run time. The super low standby mode (current 3uA) offers almost zero loss of battery life Easy to operate Switch and Operations Momentary activation: Click anywhere (except strobe switch/circular button) on the pressure pad to active momentary-on mode. Constant-on: Press and hold the constant-on switch for more than 1 second for constant-on mode with high output. High-Mid-Low Outputs: With constant-on activated, press the constant-on switch for more than 0.6 second to cycle through High-Mid-Low modes. Click anywhere on the pressure pad (all but the strobe switch) to turn the light off. Strobe: When the light is on or off, click the strobe switch (circular button) to access the strobe function. To deactivate strobe, click the strobe switch again--- this will switch to the previous output(s). For example, if it was turned off prior to accessing the strobe function, the unit will return to off mode. If it was set previously to the mid output mode, the unit will return to mid output mode. Specifications: High quality durable PU material 100,000 clicks life cycle Waterproof to IPX-8 standard Diameter of tail: 23mm. Length of tail: 36mm Length of wire: 23cm. Whole length of remote pressure switch: 46mm Weight: 33g It fits on XT1A, XT1C and XT2A.